Notifications:
Statements:
Agreements:
06.03.2018
Out of concern for the natural environment in December 2002, TS PCB implemented the Integrated Quality and Environmental Management System­, according to PN-EN ISO 14001 (currently in the PN-EN ISO 14001:2015 version).   The adopted environmental policy obligates the company to mini...
12.02.2018
One of the ways to minimise the impact on the natural environment is the reuse of materials recovered from waste accompanying PCB manufacture. This technique reduces the final amount of waste and the use of natural resources. A list of the main waste groups (or their components), together with the p...
24.01.2018
The generation, storage and disposal of waste at TS PCB is mainly regulated by the waste generation permit.   It contains a brief description of the manufacturing technology (type and parameters of the plants that are the source of waste generation), and defines the types and acceptable...
16.01.2018
The manufacture of printed circuits is a very complex process that uses a wide range of materials and chemicals. Many of them require special storage and the use of specialised methods of industrial waste disposal. Some of the substances are dangerous for humans and the environment. The article disc...
30.11.2017
The basic task of electrical testing is to verify the conformity of the design’s mosaic network, reproduced in a real, manufactured circuit. This enables the detection of critical damage to the mosaics in the form of short and open circuits that modify the network structure. In the case of opt...
23.11.2017
In contrast to testers with moving probes which have a small number of measuring heads (usually 4), in the blade testers a significant number of fixed measuring probes are used in the form of needles of different diameters (fig.1). The diameters of the needles match the contact surface area of the t...
08.11.2017
Although application of the fast mechanics and the measuring heads relocation improvement which guarantees testing even a few thousand test points per minute the test time of the single production format containing complicated and packed HDI circuits may reach a few minutes or even longer. Long test...
03.11.2017
The operation rule of those type testers, also called finger ones, relays on performing measurements with use of measuring heads equipped in probes moving on both sides of the stationary fixed printed circuit (pic. 1a). In the most popular configuration the tester is disposing four resistance measur...
27.10.2017
Printed circuits production similar to a serial production of other goods is characterized with a certain efficiency level or the level of the rejected pieces. Rejected circuit means each piece which is not fulfilling design assumptions of the customer or precisely specified industry standards. An e...
13.06.2017
The base material used to produce the PCB affects the reliability and efficiency of the final product. The laminate may be selected based on two criteria: quality and functionality.   Currently, printed circuits are manufactured using laminates on the following substrates: glass-rein...
05.04.2017
The Integrated Quality and Environmental Management directly corresponds with the quality of the PCB. Therefore we are glad to gain new ISO certificate for norm 9001:2015 i 14001:2015.
17.11.2016
According to the IPC-A-600 document, there are three general classes of final products. The purpose of this classification was to identify the following differences: manufacture process technological advancement operational reliability requirements depending on the board purpose. In...
10.11.2016
The most common specifications used within the printed circuit boards production are the documents issued by the IPC. The main set: IPC-6010 “Family of Board Performance Documents" includes the following specifications: 6011: Generic Performance Specification for Printed Boards,...
25.11.2015
Modern electronic devices are expected to deliver high functionality, small form factors and high reliability. These features are achieved with large numbers of miniature and composite integrated circuits which are interconnected by complex networks. Mapping those IC's on a typical double-side...
25.11.2015
The life (or durability) and reliability of electronic equipment depends on the quality and types of applied components, including the printed circuit boards (PCBs), which are the cornerstone of a performer electronic circuit. Hence it is extremely important to properly select the parameters of ba...
25.11.2015
It is difficult to imagine a modern electronic device that lacks a PCB. The continuing development of technologies and fierce market competition force electronic equipment manufacturers to improve product functionality and appeal by adopting the state of the art solutions. This usually requires pa...
25.11.2015
The current requirements and expectations of customers in the PCB sector for reliable and failure-free performance of purchased equipment are definitely higher than only a few years ago. An undisputed reason is the dynamic growth of technology with the concomitant progress in quality. Even the sim...
25.11.2015
The quality of printed circuit boards (PCBs) relies heavily on the design method. It is the stage at which the designers already define the production workflow and the probability of quality defects. Many potential errors can be avoided by introducing cosmetic changes to the design, which will pro...
25.11.2015
The complexity of electronic circuits has been growing, and the emerging new technologies raise the bar for these products. The parameters of PCBs (printed circuit boards), which are components of electronic equipment, must also follow the demands. Hence PCB designers should be aware what solution...
25.11.2015
Rosnąca stale złożoność układów oraz stopień upakowania ich elementów na obwodach drukowanych zaczyna przysparzać konstruktorom i inżynierom problemów związanych z zapewnieniem właściwego odprowadzania ciepła, wydzielanego w półprzewodnikowych elementach wys...